Battery operated WIFI/BLE Module
The features a fully integrated 2.4GHz radio transceiver and baseband processor for Wi-Fi 802.11b and Bluetooth® Smart applications. The SoC can be used as a standalone application-specific communication processor or as a wireless data link in hosted MCU systems where ultra-low power is critical. The OPL1000 supports flexible memory architecture for storing profiles, stacks and custom application codes, and can be updated using Over-The-Air (OTA) technology. Qualified Bluetooth Smart protocol stack and Wi-Fi TCP/IP stack are stored in a dedicated ROM. FS-L110 include OPL1000 SoC is equipped with dual processors, ARM® Cortex®-M0 and M3, for handling different processes. All software runs on the ARM® Cortex®-M0 processor while more intensive application-specific activities run on the ARM® Cortex®-M3 processor. Can be connected to any external MCU through SPI, I2C or UART interfaces and sensors or other devices through GPIOs. The transceiver interfaces directly to the antenna and is fully compliant with the Wi-Fi 802.11b and Bluetooth 5.0 BLE standards. With integrated antenna switch, RF balun, power amplifier (PA) and low noise amplifier (LNA), the OPL1000.
WIFI/BLE SoC IntroductionPart No. | Spec | Doc / SDK | Chip | Features | Sleep(uA) | Rx(mA) | Tx(mA) | Tx Output Pw(dBm) | Rx Sensitivity(dBm) | Dimension(mm2) |
---|---|---|---|---|---|---|---|---|---|---|
FS-i5005_OP10 | OPL1000 | WiFi 11b+LE, ultra low power | ~2 | Wi-Fi: ~18 | Wi-Fi: ~20 (0dBm) | Wi-Fi: 0-15 LE: 0-10 | Wi-Fi: -92(11b) | ~9.5 | ||
FS-i5006_OP12 | OPL1200 | WiFi 11b+LE, Addition of 8Mbit embedded Flash as the system primary Flash. The 8Mbit embedded Flash is used to store user application and system patch. | ~2 | Wi-Fi: ~18 | Wi-Fi: ~20 (0dBm) | Wi-Fi: 0-15 LE: 0-10 | Wi-Fi: -92(11b) | ~9.5 |